Bundle DI-624+ (54Mbps Wireless Broadband Router) + DWL-G122 (54Mbps Wireless 802.11g USB adapter)
Up to 108Mbps
Advanced Firewall & Parental Control
802.11g, 802.11b Compatible
Increased Security with 802.1X and WPA
Now the popular D-Link Xtreme G wireless router just got faster, while maintaining adherence to the IEEE 802.11g standard.
A new free firmware upgrades D-Link 802.11g Xtreme G products to deliver the Industry’s fastest performance, up to 15 times faster than 802.11b. With a maximum wireless signal rate of up to 108Mbps, the 802.11g D-Link Xtreme G DI-624 Wireless Router with enhanced 108 delivers excellent and consistent data rate throughput.
The D-Link Xtreme G with enhanced 108 features the industry’s first default 108Mbps “Dynamic Mode” that allows clients to always operate at the highest possible speeds while automatically identifying and recognizing other D-Link Xtreme G products for highest performance capability and seamless access to the wireless network in a homogenous environment.
This 108Mbps firmware upgrade is currently available for Revision B & C only.
Firmware for upgrading to 108Mbps is not available for Revision A.
Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.
Extensive performance and interoperability testing using standard based methods including NetIQ’s Chariot software reveals a significant increase in performance of the D-Link Xtreme G over other 802.11g based competitors.
The D-Link Xtreme G DI-624 wireless router with 108Mbps upgrade employs five cutting-edge hardware-based compression technologies to achieve a significant boost in performance within the 2.4GHz frequency range.
Packet Bursting: The packet bursting technique puts more data into a single transmission, allowing more raw data to be stuffed into each packet and as a result not only delivers much more data, but also executes this process with less traffic on the network. Packet bursting transforms lengthy binary code into simple equations, resulting in an overall reduction in the number of 1s and 0s being sent over the network. It is also the technique defined as one of the methods for performance improvement in the IEEE 802.11e QOS draft standard.
Fast Frames: The fast frames technique enhances data throughput by increasing the number of bits sent per data frame and accelerating the timing of a data frame with a dynamic transmit optimizations. This technology enhances the Packet Bursting capability synergistically to provide accelerated performance results. The fast frames technique is also based on the 802.11e QOS draft standard.
Hardware Compression and Encryption: Xtreme G uses the Atheros AR5002 chipset which employs special engines to compress and encrypt data. These hardware engines operate in real-time to enhance throughput by implementing standard algorithms and compressing data prior to transmission and after reception.
Multi-Channel Bonding: Multi-Channel Bonding embraces two radio channels simultaneously. It collapses the available channels from 12 to 6 for increased bandwidth on the available channels. Single and double channels are not run at the same time. This technology senses single channel and dual channel frames and negotiates time-based solutions with priority on single channel processing.
Select Mode: Select Mode gives users the option of locking the Xtreme G products into a Static mode (instead of the default Dynamic mode) for even higher performance within a complete D-Link 108Mbps Xtreme G environment.
The D-Link 802.11g DI-624 Xtreme G features robust security to protect the wireless network from intruders, complying with the latest wireless networking security protocols, including WEP encryption and Wi-Fi Protected Access (WPA) support for both 802.1x and WPA-PSK. The DI-624 is also capable of supporting the government-grade AES encryption and upcoming 802.11i standards.
In addition to being the industry’s fastest wireless network solution, It includes management settings and policy-based content filtering for advanced network management. Filters can be set based on MAC address, IP address, URL and/or Domain Name.
The D-Link Xtreme G DI-624 wireless router with 108 upgrade is ideal for creating a fast and affordable wireless network, delivering the industry’s fastest wireless network performance. D- Link Xtreme G is also the only 802.11g solution with 108Mbps mode that remains fully interoperable and compatible with all 2.4GHz devices, capable of creating one homogenous network environment for the multi-vendor environment.
D-Link DI-624+ AirPlus Xtreme G High-Speed 2.4GHz (802.11g) & DWL-G122, CCK,OFDM, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, Web-Based, DHCP Server & Client, 128-bit WEP, NAT with VPN Pass-through, MAC Filtering, IP Filtering, URL Filtering, Domain Blocking, Scheduling, , PPTP L2TP IPSec
D-Link DI-624+ AirPlus Xtreme G High-Speed 2.4GHz (802.11g) & DWL-G122. Modulation: CCK,OFDM. Datalink-protokol: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, Administration protokoller: Web-Based, DHCP Server & Client. Sikkerhedsalgoritmer: 128-bit WEP, Firewall sikkerhed: NAT with VPN Pass-through, MAC Filtering, IP Filtering, URL Filtering, Domain Blocking, Scheduling, , VPN support: PPTP L2TP IPSec. LED indikatorer: Strøm, WAN. Vægt: 298 g